News:

SMF - Just Installed!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - Randall (Admin)

#1
New pi-Stomp v2.3.0-beta software is ready to try (as a pre-built!)

As we wait for v3 kits to deliver from manufacturing, those of you with a v2 (aka ?Core?) can benefit from all the new software features and upgrades we?ve done in the last few months.


And we?ve built it for you, so just burn the OS image and boot it!


Works with any pi-Stomp v2 (aka ?core) hardware.  v1 hardware still has an issue with the LCD to resolve.


Please try it out and let us know what you think!

More info and Download here: https://github.com/treefallsound/pi-stomp/releases/

Added

    Pre-built software installation
    Support for v3 hardware
    New LCD UI (v3 and v2 hardware)
    New access to global EQ (v3 and v2 hardware with IQAudio card)
    Patchstorage for plugin management (discovery, download, install)
    Filemanager for uploading audio files, MIDI, Impulse Response, Instruments and Amp Models (eg. NAM, Aida)
    Support for tap-tempo (v3 and v2 hardware)
    Support for most all common tasks via LCD/MOD-UI (ssh not required, v3 and v2 hardware)
    Support for Pedalboard Banks (v3 and v2 hardware)
    Support for alternate footswitch actions: longpress, multi-switch (v3 and v2 hardware)
    Support for additional plugin parameter types: log, enum, bool (v3 and v2 hardware)
    Support for assignable (multi-color) LED indicators (v3 hardware only)
    Ability to update (stash and pull) sample pedalboards via git

Changed

    Upgrade to RPi bookworm OS
    Upgrade to python 3.11.1
    Upgrade to MOD v1.13
    Upgrade Real-time Kernel to 6.1.54
    Switched to using Network Manager for network management
    Switched to using gpiozero instead of RPi.GPIO (for pi5 compatibility)
    Added hardware config file (default_config.yml) validation via schema
#2
Using pi-Stomp / Other audio software works on pi-Stomp!
February 02, 2021, 02:10:20 PM


pi-Stomp has always intended to be a platform. One of its main advantages over commercial units, is that it runs Linux, and thus can run additional software.

I just committed some minor software changes to allow the hardware to work independently of the recommended MOD software. So now, you can use pi-Stomp hardware with other audio plugin hosts!

You can even MIDI-map the pi-Stomp controls and footswitches to control effect parameters in the host.

I’ve tested two such hosts so far. They both work great.

Rakarack â€" an awesome (Free) guitar oriented virtual pedalboard


Carla â€" a Free, full featured modular audio host. It can run multiple plugin formats including LADSPA, DSSI, LV2, VST2, VST3 and AU, plus SF2 and SFZ sound font files!


For more details and installation instructions, check out https://treefallsound.com/wiki/doku.php?id=other_software_running_on_pi-stomp_hardware

We’ll likely eventually add improved support for software like these so that the LCD and rotary encoders can be used to change settings, presets, pedalboards, etc.
#3
Although this Forum Topic is open for discussion of bugs/issues/feature-requests etc., formal reporting and tracking should be done in the github project(s). 

For pi-Stomp software go here: https://github.com/TreeFallSound/pi-stomp/issues
#4
General / Forum Rules of Conduct
September 27, 2020, 11:05:30 PM
This forum is provided to discuss DIY musical effects.  It is not intended as a general "Lounge" type forum, so please don't use it for topics that aren't in the general realms of music, instruments, effects, electronics, DIY, etc.

We hope it'll serve as a very open, good natured, helpful forum and not require moderation.

Abuse on this forum will not be tolerated.  The administrator reserves the right to delete any posts which are considered offensive, harassing, racist, sexist, etc. and to suspend the account of anyone for any reason.

Like Bill and Ted taught us, Be excellent to each other!